Flattened, Antique, Black Powder Horn with Copper/Brass End Piece, Copper Hardware and Brass Charger, Possible Contemporary Restoration
$95.00
This interesting piece appears to be an old, flattened horn which has been restored by the contemporary artisan Tom Pike, the horn came with a hang tag stating that it was "pictured in Muzzle Blast Mag". I attempted to find this reference and was able to find the magazine but not this specific photo. That hang tag is included.
Based on condition I would date the body of the horn to the early to mid 1800's. The end piece is formed of a copper jacket that has been incised with decorative blackened bands and encircles the end of the horn. There is a flat brass plate that forms the end seal, this plate is beginning to separate from the copper jacket and should you wish to use this horn, that would need to be repaired. The charger is made of brass and is a contemporary copy of a early charger with graduated spout that allowed adjustment of powder load. This spout works but there are no markings indicating grains. Two flattened copper loops have been added to secure a carry strap, these are also period appropriate. This horn would make a wonderful display piece, with a rich history. The body of the horn remains solid, there is evidence of insect damage but nothing penetrating the body, this type of damage is common in horns from the early to mid 1800's and I would consider appropriate for age. With attention to the previously mentioned end plate, this horn could be used if desired.
The horn is approx. 9 1/2 inches long from end piece to tip of the charges spout, not accounting for the curvature of the horn. The end piece is oval in shape, approx. 3 inches long and 1 3/8 inches wide. External diameter of the spout is approx. 3/8 inch, the charger functions as it should. Please carefully review all photos for full perspective.
As always, thank you for stopping by the shop and for your interest in this piece. Please do not hesitate to contact us with any questions you may have.
Based on condition I would date the body of the horn to the early to mid 1800's. The end piece is formed of a copper jacket that has been incised with decorative blackened bands and encircles the end of the horn. There is a flat brass plate that forms the end seal, this plate is beginning to separate from the copper jacket and should you wish to use this horn, that would need to be repaired. The charger is made of brass and is a contemporary copy of a early charger with graduated spout that allowed adjustment of powder load. This spout works but there are no markings indicating grains. Two flattened copper loops have been added to secure a carry strap, these are also period appropriate. This horn would make a wonderful display piece, with a rich history. The body of the horn remains solid, there is evidence of insect damage but nothing penetrating the body, this type of damage is common in horns from the early to mid 1800's and I would consider appropriate for age. With attention to the previously mentioned end plate, this horn could be used if desired.
The horn is approx. 9 1/2 inches long from end piece to tip of the charges spout, not accounting for the curvature of the horn. The end piece is oval in shape, approx. 3 inches long and 1 3/8 inches wide. External diameter of the spout is approx. 3/8 inch, the charger functions as it should. Please carefully review all photos for full perspective.
As always, thank you for stopping by the shop and for your interest in this piece. Please do not hesitate to contact us with any questions you may have.
This interesting piece appears to be an old, flattened horn which has been restored by the contemporary artisan Tom Pike, the horn came with a hang tag stating that it was "pictured in Muzzle Blast Mag". I attempted to find this reference and was able to find the magazine but not this specific photo. That hang tag is included.
Based on condition I would date the body of the horn to the early to mid 1800's. The end piece is formed of a copper jacket that has been incised with decorative blackened bands and encircles the end of the horn. There is a flat brass plate that forms the end seal, this plate is beginning to separate from the copper jacket and should you wish to use this horn, that would need to be repaired. The charger is made of brass and is a contemporary copy of a early charger with graduated spout that allowed adjustment of powder load. This spout works but there are no markings indicating grains. Two flattened copper loops have been added to secure a carry strap, these are also period appropriate. This horn would make a wonderful display piece, with a rich history. The body of the horn remains solid, there is evidence of insect damage but nothing penetrating the body, this type of damage is common in horns from the early to mid 1800's and I would consider appropriate for age. With attention to the previously mentioned end plate, this horn could be used if desired.
The horn is approx. 9 1/2 inches long from end piece to tip of the charges spout, not accounting for the curvature of the horn. The end piece is oval in shape, approx. 3 inches long and 1 3/8 inches wide. External diameter of the spout is approx. 3/8 inch, the charger functions as it should. Please carefully review all photos for full perspective.
As always, thank you for stopping by the shop and for your interest in this piece. Please do not hesitate to contact us with any questions you may have.
Based on condition I would date the body of the horn to the early to mid 1800's. The end piece is formed of a copper jacket that has been incised with decorative blackened bands and encircles the end of the horn. There is a flat brass plate that forms the end seal, this plate is beginning to separate from the copper jacket and should you wish to use this horn, that would need to be repaired. The charger is made of brass and is a contemporary copy of a early charger with graduated spout that allowed adjustment of powder load. This spout works but there are no markings indicating grains. Two flattened copper loops have been added to secure a carry strap, these are also period appropriate. This horn would make a wonderful display piece, with a rich history. The body of the horn remains solid, there is evidence of insect damage but nothing penetrating the body, this type of damage is common in horns from the early to mid 1800's and I would consider appropriate for age. With attention to the previously mentioned end plate, this horn could be used if desired.
The horn is approx. 9 1/2 inches long from end piece to tip of the charges spout, not accounting for the curvature of the horn. The end piece is oval in shape, approx. 3 inches long and 1 3/8 inches wide. External diameter of the spout is approx. 3/8 inch, the charger functions as it should. Please carefully review all photos for full perspective.
As always, thank you for stopping by the shop and for your interest in this piece. Please do not hesitate to contact us with any questions you may have.
This interesting piece appears to be an old, flattened horn which has been restored by the contemporary artisan Tom Pike, the horn came with a hang tag stating that it was "pictured in Muzzle Blast Mag". I attempted to find this reference and was able to find the magazine but not this specific photo. That hang tag is included.
Based on condition I would date the body of the horn to the early to mid 1800's. The end piece is formed of a copper jacket that has been incised with decorative blackened bands and encircles the end of the horn. There is a flat brass plate that forms the end seal, this plate is beginning to separate from the copper jacket and should you wish to use this horn, that would need to be repaired. The charger is made of brass and is a contemporary copy of a early charger with graduated spout that allowed adjustment of powder load. This spout works but there are no markings indicating grains. Two flattened copper loops have been added to secure a carry strap, these are also period appropriate. This horn would make a wonderful display piece, with a rich history. The body of the horn remains solid, there is evidence of insect damage but nothing penetrating the body, this type of damage is common in horns from the early to mid 1800's and I would consider appropriate for age. With attention to the previously mentioned end plate, this horn could be used if desired.
The horn is approx. 9 1/2 inches long from end piece to tip of the charges spout, not accounting for the curvature of the horn. The end piece is oval in shape, approx. 3 inches long and 1 3/8 inches wide. External diameter of the spout is approx. 3/8 inch, the charger functions as it should. Please carefully review all photos for full perspective.
As always, thank you for stopping by the shop and for your interest in this piece. Please do not hesitate to contact us with any questions you may have.
Based on condition I would date the body of the horn to the early to mid 1800's. The end piece is formed of a copper jacket that has been incised with decorative blackened bands and encircles the end of the horn. There is a flat brass plate that forms the end seal, this plate is beginning to separate from the copper jacket and should you wish to use this horn, that would need to be repaired. The charger is made of brass and is a contemporary copy of a early charger with graduated spout that allowed adjustment of powder load. This spout works but there are no markings indicating grains. Two flattened copper loops have been added to secure a carry strap, these are also period appropriate. This horn would make a wonderful display piece, with a rich history. The body of the horn remains solid, there is evidence of insect damage but nothing penetrating the body, this type of damage is common in horns from the early to mid 1800's and I would consider appropriate for age. With attention to the previously mentioned end plate, this horn could be used if desired.
The horn is approx. 9 1/2 inches long from end piece to tip of the charges spout, not accounting for the curvature of the horn. The end piece is oval in shape, approx. 3 inches long and 1 3/8 inches wide. External diameter of the spout is approx. 3/8 inch, the charger functions as it should. Please carefully review all photos for full perspective.
As always, thank you for stopping by the shop and for your interest in this piece. Please do not hesitate to contact us with any questions you may have.